C-Frame Press Manufacturer & Factory
C-Frame Fixed Bolster Press
JH21
SINGLE POINT, FROM 25-400 TONS
Press Information & Overview
High Quality, Industry Leading Mechanical
C-Frame Presses
- Good rigidity, stable accuracy
- Compact structure, six-sided guide rail
- Low noise, low component wear
- Imported PLC centralized control, various stamping modes
- Key components are imported
- Resin sand casting makes the surface of the fuselage smooth
Standard Components & Optional Accessories
Standard Components
- Wet clutch (WORLD)
- Hydraulic overload protecting pump
- Auto lubrication system
- Manual lubrication system
- Balance cylinders for slide and upper die
- Joint for miss-feeding
- Touch screen
- Electronic crankshaft angle indicator(JH21-25~80 with pointer)
- Cam controller
- Die height adjusted motor(JH21-60~400)
- PLC: Programmable logical controller
- Air source quick connector
- Shock Absorption Pads
- Working lamp
- Air blowing
- Second degree drop
- Preset counter (Touch screen display)
Optional Accessories
- Dry clutch
- Air cushion apparatus
- Light curtain Protection
- Die quick change device
- Foot pedal
- Output shaft
- Requency control
- Top stripping device for slider
Wet Clutch and Brake
The World Wet Clutch use Japanese advanced technology which has very well stability. Adopt oil bath lubrication and form oil slick betdween friction plates, friction loss small, long service life and low maintenance cost.
Balanced Cylinder
The balance sliding block and upper die weight can reduce the impact and noise, eliminate the gap between the connecting rod and the sliding block, reduce the impact and abrasion of loaded parts and enhance the molding precision of the parts.
Crankshaft
High quality alloy steel die forging crankshaft with compact structure, with good smoothness and flexible rotation.
Overload Protection
If the usage capacity exceeds the
capacity of the device itself, overload
stop will occur to protect the machine.
（Standard across the entire range）
Digital Die Height
Die height is displayed in real time
through the electronic reader, and all
the data is clear at a glance
Light Curtain
Used to protect operators from getting
too close to a press while its moving.
Standard configuration mounted to
side mesh guarding.
Gear
High strength welded gears (surface grinding treatment) taper fit of the gear to the crankshaft provides true concentricity between crankshaft and gear. Integrated hard end pinion minimizes required gear diameters and related drivetrain inertia.
JH21 C-Frame Fixed Bolster Press Specification
| Specifications | Unit | JH21-25 | JH21-45 | JH21-60 | JH21-80 | JH21-100 | JH21-125 | JH21-160 | JH21-200 | JH21-250 | JH21-315 | JH21-400 | |
| Nominal force | KN | 250 | 450 | 600 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 3150 | 4000 | |
| Nominal Stroke | mm | 3 | 4 | 4 | 5 | 5 | 6 | 6 | 6 | 6.5 | 7 | 8 | |
| Slide Stroke | mm | 80 | 120 | 140 | 160 | 160 | 180 | 200 | 200 | 220 | 220 | 250 | |
| Slide Strokes Per Minute | Fixed | min-1 | 100 | 80 | 70 | 60 | 55 | 50 | 45 | 45 | 33 | 33 | 30 |
| Variable | 60-120 | 50-95 | 45-85 | 40-75 | 35-65 | 35-60 | 30-55 | 30-55 | 25-40 | 25-40 | 20-35 | ||
| Maximum Die Set Height | mm | 250 | 270 | 300 | 320 | 335 | 350 | 400 | 450 | 500 | 500 | 550 | |
| Die Height Adjustment | mm | 50 | 60 | 70 | 80 | 90 | 90 | 100 | 110 | 120 | 120 | 120 | |
| Between slide center and frame | mm | 210 | 225 | 270 | 310 | 330 | 350 | 400 | 430 | 450 | 450 | 450 | |
| Columns Distance | mm | 470 | 525 | 560 | 580 | 670 | 630 | 696 | 910 | 980 | 980 | 1050 | |
| Bottom size of slide | L×R | mm | 360 | 400 | 480 | 540 | 620 | 620 | 700 | 880 | 900 | 900 | 1020 |
| F×B | mm | 250 | 340 | 400 | 460 | 520 | 520 | 580 | 650 | 700 | 700 | 750 | |
| Shank Hole Size | Dia | mm | 50 | 50 | 50 | 50 | 70 | 70 | 70 | 70 | 70 | 70 | 70 |
| Depth | mm | 50 | 60 | 70 | 70 | 80 | 80 | 100 | 100 | 100 | 100 | 100 | |
| Bolster size | L×R | mm | 720 | 825 | 930 | 950 | 1060 | 1100 | 1175 | 1390 | 1500 | 1540 | 1700 |
| F×B | mm | 400 | 440 | 520 | 600 | 640 | 680 | 760 | 840 | 880 | 880 | 880 | |
| Blanking Hole Diameter | mm | 150 | 150 | 150 | 180 | 180 | 200 | 220 | 240 | 240 | 240 | 240 | |
| Bolster Thickness | mm | 80 | 110 | 130 | 140 | 145 | 155 | 165 | 180 | 190 | 190 | 210 | |
| Bolster Surface Height | mm | 750 | 775 | 800 | 845 | 850 | 850 | 900 | 1000 | 1000 | 1000 | 1100 | |
| Overall Dimensions | F×B | mm | 1500 | 1540 | 1585 | 1765 | 2000 | 2040 | 2305 | 2600 | 2660 | 2720 | 2850 |
| L×R | mm | 945 | 1075 | 1200 | 1200 | 1300 | 1320 | 1420 | 1540 | 1640 | 1680 | 1750 | |
| H | mm | 2090 | 2365 | 2470 | 2675 | 2960 | 2980 | 3210 | 3800 | 3850 | 3850 | 4585 | |
| Distance Between Foundation Bolts | F×B | mm | 990 | 1095 | 1105 | 1225 | 1350 | 1445 | 1665 | 2020 | 2230 | 2200 | 2385 |
| L×R | mm | 690 | 760 | 840 | 920 | 1020 | 1040 | 1140 | 1360 | 1460 | 1500 | 1570 | |
| Motor | Power | Kw | 3 | 5.5 | 5.5 | 7.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 |
| Press Pressure | Mpa | 0.5 | |||||||||||
Cases
Contact World Group To Get Your Competitive Advantage
- Get A Quote
- Request For Catalog
- Ask For Machine Details
- Get Worry-free Solution