H-Frame Press Manufacturer & Factory
Heavy Mechanical Press
JL36
TWO POINTS MULTI-LINK, FROM 630-2000 TONS
Press Information & Overview
High Quality, Industry Leading Mechanical
H-Frame Presses
- Multi-connecting rods transmission and connecting rod differential rotation
- Finite element analysis is applied to large-scale structure, with high rigidity
- Universalization, standardization and modular design
- With special friction clutch brake
- High-performance, high-precision and high-stability
- Special aseismic design
- With heavy load self-lubrication system and automatic alarm function
- With imported hydraumatic overload protection device
- With over-length quadrangle eight-face guide rail
- Two-circuit control by electronic cam and mechanical cam
- Can store mold parameter and realize automatic adjustment
- Cooperate with automatic feed and connection to realize automation on-line production
- Optimized design of drive system and appearance by Solid work
Standard Components & Optional Accessories
Standard Components
- Dry clutch and brake with separate part
- Hydraulic overload protecting pump
- Dilute oil circulation lubrication system
- Balance cylinders for slide and upper die
- Digital die height indicator
- PLC: Programmable logical controller
- Electronic crankshaft angle indicator
- Mechanical and digital cam controller
- Movable operation panel
- Die height adjusted motor
- Inverter
- Air source quick connector
- Foundation bolts
- Light curtain
Optional Accessories
- Cushion
- Tonnage display instrument
- Automatic peripherals
- Shock absorber
- Upper mold clamping system
- Waste conveyors
- Top stripping device for slider
Light Curtain
Used to protect operators from getting too close to a press while its moving.Standard configuration mounted to side mesh guarding.
Overload protection
If the usage capacity exceeds the capacity of the device itself, overload stop will occur to protect the machine.（Standard across the entire range）
PLC
Maintains a high degree of synchronization and stability at each working stage，automatically adjust the pressure and speed, making the press’s movements smoother, reducing mechanical shock and vibration.
Dilute oil circulation lubrication system
Oil circulates in the system, reducing the consumption of lubricating oil, ensuring uniform lubrication at each lubrication point, effectively carrying away the heat generated by friction, stable and reliable.
Dry clutch and brake with separate part
Using rigid interlock with no interference and Japan imported TOYOOKI double valve. Adopt the dynamic balance test, reduce the vibration and the energy loss of the flywheel.
Movable operation panel
According to the needs, can move the operation table to the appropriate position to improve work efficiency; save workspace, providing great flexibility; considering work safety, reduce potential safety hazards.
Multi-connecting rods transmission and connecting rod differential rotation
Precise control of motion paths and high-precision motion control; effectively transmit force and motion;can be customized according to different application requirements, with good adaptability; a variety of different motion modes to adapt to different job requirements;easy to inspect and maintain.
Multi-functional operation panel
According to the needs, can move the operation table to the appropriate position to improve work efficiency; save workspace, providing great flexibility; considering work safety, reduce potential safety hazards.
JL36 H-Frame Press Specification
| Specifications | Unit | JL36-630 | JL36-800 | JL36-1000 | JL36-1300 | JL36-1600 | JL36-2000 | |
| Nominal force | KN | 6300 | 8000 | 10000 | 13000 | 16000 | 20000 | |
| Nominal Stroke | mm | 13 | 13 | 13 | 13 | 13 | 13 | |
| Slide Stroke | mm | 700 | 750 | 800 | 900 | 1000 | 1000 | |
| Slide Strokes Per Minute | min-1 | 10-20 | 10-18 | 10-16 | 10-16 | 10-16 | 10-15 | |
| Maximum Die Set Height | mm | 1100 | 1100 | 1100 | 1200 | 1200 | 1300 | |
| Die Height Adjustment | mm | 550 | 550 | 600 | 650 | 650 | 700 | |
| Bolster size | mm | 1600X3600 | 1800×3800 | 1800×4000 | 1800×4000 | 1900×4600 | 2000×4600 | |
| Bottom size of slide | mm | 1600X3600 | 1800×3800 | 1800×4000 | 1800×4000 | 1900×4600 | 2000×4600 | |
| Work Capacity | mm | 16000 (AT SPM20) | 19000 (AT SPM18) | 25000 (AT SPM16) | 32000 (AT SPM16) | 38000 (AT SPM16) | 52000 (AT SPM15) | |
| Height of bolster surface | mm | 700 | 700 | 750 | 750 | 750 | 800 | |
| Maximum upper die weight | KG | 15 | 15 | 20 | 25 | 25 | 30 | |
| Cushion | Pressing/Ejector Force | KN | 1000/1000 | 1200/1200 | 1500/1500 | 2000/2000 | 2400/2400 | 3000/3000 |
| Stroke | mm | 0-300 | 0-300 | 0-300 | 0-300 | 0-350 | 0-350 | |
| Control mode | PLC | |||||||
| Motor Power | KW | 90 | 110 | 132 | 160 | 200 | 250 | |
| Height Press Above Ground | mm | 9100 | 9300 | 9600 | 10100 | 10550 | 10900 | |
| Overall Dimensions | mm | 5600×6550 | 5750×6800 | 6150×7150 | 6250×7150 | 6450×7800 | 6600×8000 | |
Cases
Contact World Group To Get Your Competitive Advantage
- Get A Quote
- Request For Catalog
- Ask For Machine Details
- Get Worry-free Solution