Heavy Mechanical Press Manufacturer & Factory
Heavy Mechanical Press
JX36
TWO POINTS, FROM 400-1250 TONS
Press Information & Overview
High Quality,
Industry Leading
Heavy Mechanical Press
- Small distance between slider, larger working area
- High working speed, high production efficiency
- Applied to diverse metal forming needs, continuous punching and fully automatic mobile punching
- Strong ability to resist eccentric loads, improve work efficiency
Standard Components & Optional Accessories
Standard Components
- Light curtain
- Dry clutch
- Hydraulic overload protecting pump
- Circulation lubrication system
- Balance cylinders for slide and upper die
- Digital die height indicator
- Joint for miss-feeding
- Touch screen
- Electronic crankshaft angle indicator
- Machinery &Electronics cam controller
- Movable operation panel
- Die height adjusted motor
- PLC: Programmable logical controller
- Domestic inverter
- Air source quick connector
- Air blowing device
- Foundation bolts
Optional Accessories
- Cushion
- Die quick change device
- Movable working table
- Automatic peripherals
Light curtain
Protect operators from getting too close to a press while operating. Standard configuration mounted to side mesh guarding.
Dry clutch and brake with separate part
Using rigid interlock with no interference and Japan imported TOYOOKI double valve. Adopt the dynamic balance test, reduce the vibration and the energy loss of the flywheel.
Overload protection
If the usage capacity exceeds the capacity of the device itself, overload stop will occur to protect the machine.（Standard across the entire range）
Balanced Cylinder
Adopted structure with guided pillars and sleeves, can reduce the impact and noise, eliminate the gap between the connecting rod and the sliding block, reduce the impact and abrasion of loaded parts and enhance the molding precision of the parts.
Touch screen
Real-time monitoring of crankshaft operating angle and operating parameters, directly change the operating mode and function Settings , able to change the operating mode at any time according to demand.
Movable operation panel
Operator can directly monitor the rotation angle of the crankshaft through the panel, and select the appropriate stamping mode, adjusting the motor speed.Overloading and lubrication faults are also clearly displayed.
JX36 Heavy Mechanical Press Specification
| Specifications | Uint | JX36-400 | JX36-500 | JX36-630 | JX36-800 | JX36-1000 | JX36-1250 | |||||||||||||
| Type | S | H | G | S | H | G | S | H | G | S | H | G | S | H | G | S | H | G | ||
| Nominal Force | KN | 4000 | 5000 | 6300 | 8000 | 10000 | 12500 | |||||||||||||
| Nominal Stroke | mm | 12 | 7 | 4.5 | 12 | 9 | 6.5 | 12 | 9 | 6.5 | 12 | 9 | 6.5 | 12 | 9 | 6.5 | 13 | 9 | 6.5 | |
| Slide Stroke | mm | 300 | 250 | 200 | 300 | 250 | 250 | 350 | 300 | 250 | 350 | 300 | 200 | 400 | 300 | 200 | 400 | 300 | 200 | |
| Slide Strokes Per Minute | min-1 | 20-30 | 25-40 | 30-60 | 20-30 | 25-40 | 30-60 | 20-30 | 25-40 | 30-60 | 15-25 | 20-35 | 30-55 | 15-25 | 20-35 | 30-50 | 15-25 | 20-35 | 30-50 | |
| Maximum Die Set Height | mm | 650 | 650 | 700 | 650 | 650 | 675 | 700 | 725 | 750 | 800 | 825 | 875 | 900 | 950 | 1000 | 1000 | 1050 | 1100 | |
| Die Height Adjustment | mm | 200 | 200 | 250 | 250 | 250 | 250 | |||||||||||||
| Slide Bottom Size(LRxFB) | mm | 3000×1300 | 3000×1500 | 3600×1500 | 4000×2000 | 4000×2000 | 4000×2000 | |||||||||||||
| Bolster Size(LRxFB) | mm | 3000×1300 | 3000×1500 | 3600×1500 | 4000×2000 | 4000×2000 | 4000×2000 | |||||||||||||
| Bolster Thickness | mm | 220 | 220 | 250 | 250 | 250 | 250 | |||||||||||||
| Side opening size | mm | 1000×650 | 1100×650 | 1200×700 | 1600×800 | 1600×900 | 1600×1000 | |||||||||||||
| Work Energy | Kg*m | 4700 (at spm25) | 4600 (at spm34) | 2600 (at spm40) | 6500 (at spm25) | 6300 (at spm34) | 4000 (at spm40) | 7000 (at spm25) | 6800 (at spm34) | 4500 (at spm45) | 9500 (at spm20) | 8800 (at spm28) | 6500 (at spm40) | 15600 (at spm20) | 12000 (at spm28) | 8000 (at spm40) | 21000 (at spm20) | 15000 (at spm28) | 9000 (at spm35) | |
| Bolster surface height | mm | 710 | 710 | 710 | 710 | 710 | 710 | |||||||||||||
| Maximum Die Height | T | 4 | 5 | 6 | 8 | 10 | 12 | |||||||||||||
| Motor Power | KW | 45 | 55 | 75 | 90 | 110 | 132 | |||||||||||||
| Height Above Ground | mm | ≈6200 | ≈6650 | ≈7000 | ≈8000 | ≈8500 | ≈9700 | |||||||||||||
| Press Pressure | Mpa | ≧0.55 | ||||||||||||||||||
Cases
Contact World Group To Get Your Competitive Advantage
- Get A Quote
- Request For Catalog
- Ask For Machine Details
- Get Worry-free Solution